Product Description:
Sand blasting room & Painting room:
This machine is a special reciprocating sand blasting machine, which consists of shot-peening chamber, shot-peening device, Screw Conveyor, elevator, separator, Shot distributing system, flat car system, flat car guide and support, lighting system, the bottom funnel, grid plate, dust- removing system, electric control system and so on.
This abrasive material reclaim system requires extremely reduced foundations, and can optionally be built without the need of foundations, or still on container type mobile rooms.
Optionally, ANTAI can supply room kits with the components that are necessary for the client, such as, for example, and automatic or semi-automatic abrasive material reclaim system, exhaust systems, etc., which will always fully meet the safety and environmental standards.
1) Doors:
The service door is built in welded profiles and has a closing in steel plates, and is internally coated with abrasion resistant
rubber. An exclusive sealing system prevents the loss of abrasive materials and makes the closing of the doors possible, without effort. Optionally, two doors can be supplied (tunnel type room) and one door for the operator. Sensors connected to the doors automatically interrupt the blasting operation when one of them is opened.
2) Luminaries:
Each LED lamps construction and positioning enable maximum utilization of the luminosity. The fastening system allows easy removal, for maintenance.
3) Working chambers:
Built in color steel tile, they are modulated in order to satisfy any dimension in height, width and length. Inside (except on the ceiling) there is a rubber coating that protects them against abrasion and helps in the acoustic insulation.
4) Horizontal transportation of abrasive material:
This system combines the drive of scraper carts that conduct the abrasive material to the center of the working chamber, where it is collected by a screw conveyor (in some cases by a belt conveyor) which conducts the abrasive material up to the foot of the bucket elevator (abrasive materials purifier). On the whole floor surface, there is a grid that is covered with a perforated
plate, which retains larger impurities or even small parts which may drop accidentally on the floor. This unique system used by CMV requires a much smaller installed power that the other systems, thanks to the friction coefficient (wear), which is much smaller in this system.
5) Control panel:
Mounted on a shielded cabinet, it has thermal protection and interlocking for the motors, which makes it impossible to connect them in the incorrect order. Optionally, it is supplied with a PLC for the automatic control of the equipment. It meets the most important international standards, among which the 60204-1 of the EEC.
6) Blasting machine:
It has a pressure vessel built in accordance with the EU standard, which is hydrostatically tested to operate at a pressure of 8 Bar (116PSI), with and outlet for one or more operators, with a remote pneumatic command and a full kit for the protection of the operator(s), and an air filter that is appropriate for human breathing. The machine also has a high-efficiency pneumatic system and high-performance nozzle(s). Optionally, it can be equipped with a level sensor for automatic feeding of abrasive material.
7) Abrasive materials purifier / Bucket elevator:
The bucket elevator receives the abrasive in its hopper and lifts it to the purifier. The elevator features buckets in nodular
cast iron that are highly resistant to abrasion and is driven by one gear motor. The abrasive materials purifier receives the
abrasive material from the bucket elevator and, with a system that is adjustable through counterweights, forms a curtain with the abrasive material, through which an air stream passes, which is also adjustable, and which takes the dust and other residues that may be contaminating the abrasive material, to the exhaust system. The abrasive material, now free from impurities, drops into the
silo that is located on the blasting machine. Optionally, the abrasive materials purifier can be supplied with a revolving screen.
8) Exhaust system:
The combination of deflectors for air intake / outlet ensures an excellent operational visibility, and, due to their construction, eliminates the waste of abrasive material. Our model BMF-H dust collectors have cartridge filters with elements in Viledon(r),which, besides ensuring an extremely low volume of residual dust (approximately 2mg/m3), have a considerably long useful life(approximately 15,000 h of work). The cleaning of the filter system is done automatically by an electronically controlled pulse-jet system. Optionally, among other items, it is possible to supply the equipment with a noise damper / rear HEPA type filter, thus obtaining a volume of residual dust of about
Model Size of room (mm) Size of jobs (mm) Spray gun quantity.
Advantages
1. Professional SolidWorks 3D design team to serve you, support drawing review with customers, adequately satisfy requirement of customers.
2. Adopting a new scraper conveyor to collect abrasive, shallow foundation pit, lower foundation cost. Scraper transmissions have fewer faults, simple maintenance, stability and reliability.
3. Spraying guns sand blasting and air jet switch adopt wireless remote control, with frequency stability, high feasibility, 100 meters control distance, low power consumption, high sensitivity.
4. Quality and popular CHNT/Delixi/Siemens/Omron PLC brands. The whole system assembled by ourselves to guarantee quality.
5. Wide application, Easy to install and use.
6. Exquisite appearance (mature craft).
7. Large factories, experienced manufacturer, Prompt delivery.
8. Over 10 years' production experience.
9. CE certificate assure you our quality.
| Model |
Size of room (mm) |
Size of jobs (mm) |
Spray gun quantity |
| AT665 |
6000×6000×5000 |
3000×3000×2500 |
2 |
| ATS666 |
6000×6000×6000 |
3000×3000×3500 |
2 |
| AT865 |
8000×6000×5000 |
5000×3000×2500 |
2 |
| AT866 |
8000×6000×6000 |
5000×3000×3500 |
2 |
| AT1066 |
10000×6000×6000 |
7000×3000×3500 |
2 |
| AT1566 |
15000×6000×6000 |
12000×3000×3500 |
2 |
| AT1586 |
15000×8000×6000 |
12000×5000×3500 |
2 |
| AT1886 |
18000×8000×6000 |
15000×5000×3500 |
4 |
| AT18108 |
18000×10000×8000 |
15000×7000×5500 |
4 |
| Spray nozzle caliber(mm) |
Compressed air consumption(m3/min) |
Sand consumption(kg/h) |
Spraying area(m2/h) |
| φ6 |
2.2 |
650 |
6 |
| φ8 |
3.92 |
1160 |
10.7 |
| φ10 |
6.1 |
1800 |
16.7 |
Specification:
Packing & Delivery
1.Equipment painting completed before shipment, With Stretch film to avoid rub off the surface paint, It can used wooden cases packaging according to users requirements.(Key parts such as electric cabinet with shockproof packaging material and then packed in wooden cases. )
2. We have 15 experienced engineers, With 108 skilled workers insure good quality of our machines and prompt delivery.
3.Meanwhile our company has a long-term cooperation with ACL, CSCL, CCNI,CNC, COSCO etc insure the goods to the port on time.
Our Services
♦ Our engineers can design target machines for customers and send them the drawing to confirm. We are always on the side of saving your cost.
♦ In the process of production, we will take photos and send to customers for their track the progress.
♦ Documents such as packing list, commercial invoice, and OEM etc. will be sent after the delivery.
♦ We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
♦ We supply overseas engineer service and help to train your workers to operate the machine.
♦ About the spare parts, we have a perfect after-sale system. Each customer will has a ID, and you log into the system all information could be checked. 24 hours service will be supplied.
Company Profile
Qingdao Antai Heavy Industry Machinery Co., Ltd. is located in the beautiful seaside city of Qingdao, Huangdao District Industrial Park, it is a research, design, manufacture, installation and commissioning advisory services as one integrated manufacturing machinery and equipment companies. The company has brought together a wealth of experience in the technical and professional workers, the main products: shot blasting machine, shot blasting machine parts, steel cleaning equipment, environmental protection equipment, EPC equipment, molding equipment, sand processing equipment , we design and production various non-standard machinery according to user needs, providing integrated technology solutions for specific customers.
"Quality create brand, Brand promote development, Development without limit" is our business purposes, to establish a sound quality management system and network information feedback system, a separate filing for each client to achieve pre-contact order, sale produced delivery, sale and installation of all sectors and efficient docking, the maximum for customers with caring and thoughtful, efficient and flexible full service. With high-quality products, attentive service, our products have been sold in more than 30 country, and a large number of domestic manufacturers to establish mutual trust and good relations of cooperation and win-win.
The company has always been adhering to the "credit-oriented, market-oriented, mutual benefit and common development," the marketing concept, we look forward to cooperate with you and your company!
WE PROVIDE THE BEST SOLUTION, NOT JUST PRODUCTS.
1. who are we?
We are based in Shandong, China, start from 2011,sell to Domestic Market(00.00%),Southeast Asia(00.00%),Eastern Europe(00.00%),Mid East(00.00%),North America(00.00%),South America(00.00%),Africa(00.00%),Oceania(00.00%),Northern Europe(00.00%),Southern Europe(00.00%),South Asia(00.00%),Western Europe(00.00%),Central America(00.00%). There are total about 101-200 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Shot Blasting Machine,Dust Collector,Molding Machine,Sand Reclamation Equipment,Sand Blasting Equipment
4. why should you buy from us not from other suppliers?
1.National standards setting enterprise 2.Industry standards setting enterprise 3.30+ years experience for shot blasting machine designing and manufacturing 4.11+ patents for invention 5.ISO9001:2008, ISO14001, CE certificate, BV &TUV certificate
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
According to your requirements,the most suitable machines will be designed for your workpieces please indicate the following details.
1.What kind of workpiece will you clean ?
2.The workpiece size,length ,width and height of maximum workpiece?
3.How many workpiecs do you want to clean per day ?
Based on this question,the detailed technical proposals will be sent to you for reference.
Contact person:Richard.Lee
Qingdao Antai Heavy Industry Machinery Co.,Ltd
Tel: +86-532-88138566 Fax:+86-532-88138577
Mob: +86-157 5321 9207
Add:No.867 Century Avenue, Huangdao district, Qingdao,Shandong province,China
){kind=link}