Automatic Shot Blasting and Painting Machine

Product Description

Steel Plate Shot Blasting Pretreatment Line

Product Description

1.Steel Plate Preservation Line:
We can design and manufacture different size of steel plate pretreatment line according to customers' requirement. Please send your detail inquiry to our email. 
     This type of steel plate auto blasting and coating machine is designed and produced by adopting the advantages of similar products from both within the country and abroad. The rusting cleaning part (shot blast cleaning) adopts high-efficient blast wheel and full shutter type shot sand separator. The sweeping machine adopts specially made high-strength nylon rolling brush and high-pressure ventilator. The preheating and drying part may adopt various heating methods. The paint spraying part adopts high-pressure airless spraying method. The complete set of equipment is controlled by PLC, and is the large-size complete equipment of international advanced. 

       This shot blasting machine and painting line is mainly used for surface treatment (namely preheating, rust removal, paint spraying and drying) of steel plate and various structural sections, as well as for cleaning and strengthening of metal structural parts.
       This machine is widely used in Shipyard, ship building industry, machinery industry, etc. 

Models and specification of steel plate blasting painting drying line:  

	Model		QXY1500	QXY2000	QXY2500	QXY3000	QXY3500	QXY4000
1	Steel plate	Width	500-1500	1000-2000	1000-2500	1000-3000	1000-3500	1000-4000
		Thickness	3-20	3-60	5-30	3-60	5-35	5-50
		Length	2000-12000	1500-12000	2000-12000	2400-12000	2000-12000	2400-16000
2	Structure parts	Max. width	1600	800	2500	1500	3500	4000
		Max. height	500	300	400	800	400	500
		Max. length	2000-12000	2400-12000	2000-12000	2400-12000	2000-12000	2400-16000
3	Roller conveyor	Permissible load	1	1	1.5	2	2	2
		speed	2-4	1-5	2-4	0.5-4	2-4	2-4
4	Total power		450	413.2	550	614	560	600

If the machine is not suitable for your workpiece, please tell us the following infromation:
1) What kind of workpiece will you clean?
2) The size of workpieces(length, width and height of maximum workpiece,Length, width and height of minimum workpiece?)
3) How many the weight of maximum and minimum workpiece?
4) Please tell us your requirement cleaning efficiency?
According to your infomation, the most suitable machines will be designed for your workpieces.
We can design and manufacture different size of steel plate pretreatment line according to customers' requirement. Please send your detail inquiry to our email.
 

Features

· Complete systems quoted

· One supplier for all components

· Proven abilities - Industry leader

· Quality components

· Proven technology

· Custom designs - Flexible layouts

· Simple integration into existing manufacturing processes

· Wide range of system sizes and variants

This type of steel plate auto blasting and coating machine is designed and produced by adopting the advantages of similar products from both within the country and abroad. The rusting cleaning part (shot blast cleaning) adopts high-efficient blast wheel and full shutter type shot sand separator. The sweeping machine adopts specially made high-strength nylon rolling brush and high-pressure ventilator. The preheating and drying part may adopt various heating methods. The paint spraying part adopts high-pressure airless spraying method. The complete set of equipment is controlled by PLC, and is the large-size complete equipment of international advanced.

A complete blasting and painting line consisting of individually adapted conveyor systems, a pre-heater, shotblasting machine, paint booth, and a post treatment dryer. Conveyor systems can be chosen according to individual requirements, together with roller conveyors, traveling grates, and cross transfer lines, etc. A gas-fired pre-heater unit allows the treatment of wet or even ice-covered material from outside storage. The paint layer produced in the paint booth will be dried in line by the post dryer unit,  allowing the handling of the components immediately upon exit for further treatment steps. To  reduce energy costs, the final drying process uses waste heat energy from the pre-heater.

Roller conveyor lines are an essential part of the overall preservation system. The components (plates, tubes or profiles) continuously pass through the pre-treatment chamber, the blasting chamber and the cleaning chamber, on a special roller conveyor. The high performance turbines mounted on the cabin housing ensure all-round coverage under controlled process conditions, and thus produce the desired cleaning effect.

 

Steel plate/sheet preservation/pretreatment line details parts 

Steel plate pretreatment line in Shandong province
Steel plate pretreatment line in Shandong province

Certifications

Main products

Company Profile

Qingdao Antai Heavy Industry Machinery Co., Ltd.

Qingdao Antai Heavy Industry Machinery has founded in 2003, formally changed to its current name in 2011. Located in the beautiful west coast of Qingdao, it is only 30 km to Qingdao seaport, convenient for export transportation. Our workshop area covers more than 15000 square meters, it is a research, design, manufacture, installation and consulting factory company for the surface finishing, environmental protection and foundry solution. Antai Group and China University of Petroleum jointly established the Qingdao Antai Haibo Technology R&D Center Co., Ltd., which focuses on the research and development of new practical equipment for shot blasting. The technical department also has many senior engineers and professional 3D designers with more than ten years of design experience. The chief engineer of the Technology R & D Center has 30 years of design experience and was hired as the chairman of the China Foundry Machinery Standards Committee to participate in the formulation of national standards for surface cleaning equipment in China. Company has extensive experience and brings the technical and professional workers together, mainly produces shot blasting machine, sand reclamation equipment, molding equipment, and dust collector. Qingdao Antai is strong at providing non-standard design and manufacture according to customer specific needs. Qingdao Antai shot blasting technology will amaze you with its intelligent design, innovative details and particularly durable components. We offer you an overall solution, as we have our own development, engineering, production and after-sales service. All systems are inspected and tested prior to delivery in our workshops to ensure fast installation on site and deliver a reliable product on time every time.Here at Qingdao Antai, after-sales support is also a top priority so we ensure that you get all the help you need with your newly delivered and tested system.Our greatest reward is the satisfaction of our customers with the results achieved thus far. The company has passed ISO9 0 0 1: 2 0 0 8, ISO 1 4 0 0 1: 2 0 04, CE certificate. Our company management strictly according to international standards ISO9 0 0 0 quality system implementation operation. We have established long term partnership with international brand suppliers, such as ABB motor; SEW gear box, Mitsubishi/OMRON/SIEMENS electric components, SMC cylinder, SKF & NSK bearing, and Asco pulse valves. With quality products, competitive price and attentive service, our products are widely sold in domestic market and exported to Amercia, Germany, Russia, Australia, India ,Greece, Sri Lanka, Vietnam, Pakistan, Uruguay, Ecuador, Colombia, Israel, Ukraine, Bangladesh, Uzbekistan, Philippines, Hungary, Macedonia and Indonesia etc. We always adhere to "honesty is the best selling, personalized service is the final product. Customer satisfaction is the greatest impetus to the development of enterprises." Aim to establish a perfect quality management system and network information feedback system for filing separately for each customer, to provide customers with maximum caring and thoughtful, efficient and flexible full service. We look forward to working with you and your company's sincere cooperation!
 

What Service Antai can supply?

1. Our engineers can work separately according to the requirements of design for clients of the equipment. and send a customer confirmation to help customers to save costs. 2. During the manufacture of the equipment, we photograph product production progress, and sent to the customer to track the progress. 3. The goods hair go, we will send the original documents for the customer (such as packing list, bill, CO, Form E, Form A, Form F, Form M, B/L etc.) 4. We can provide customers with free English foundation drawing, installation drawings, manuals, maintenance manuals and parts drawings. 5. We can send our engineers to installation and debugging overseas, and free training of operators and maintenance workers. 6. We have a set of After-sales service system, A ID will be sent to each customer, they can log in this system that view all information to buy equipment and parts by it. We provide 24-hour online consultation.