Pipe Shot Blast Machine for Steel Plate Surface Outer and Inner Cleaing

Product Description

Steel Pipe/tube inner/outer Wall Shot Blasting Machine

Steel pipe shot blasting machine is widely used for metal gridding, steel tube, petroleum, chemical, electric power industry, steel, city centralized heating, centralized drainage.

The steel pipe inner/outer wall special purpose shot blasting machine is suitable for cleaning inner/outer surface of steel pipes, remove the scales and weld dregs, make it show metal color, increase its ratio surface and weld dregs, make it show metal color, increase its ratio surface area, and thus contribute to painting and coating.  

Steel Pipe Outer wall shot blasting machine

The external/outer pipe shot blasting machine can removal the oxide scale, rust and other sundries from the pipe outer and inner to have a good effect of derusting, reach the national standard of SA2-SA3 in SR/TQ414-98. It can improve the tensile and compresive resistance of the pipe surface and can also possess the reliable depth of abrasion pattern, so as to get strong adhesion of the coating on the pipe with a satisfying result of anticorrosion and therrmal insulation. Meanwhile, the derusting speed can be adjusted as 1-6m/min according to different types. 

Steel Pipe Inner wall cleaning Sand blasting machine

This machine adopts hydraulic, electric impeller head or air pressure grit-blasting gun to eliminate rust, oxide coating, welding slag for internal pipes to make the surface appear metallic sheen, increasing the surface area. The derusting efficiency is 80-150/h and the surface preparetion level reaches 2.5-3.  According to the different diameter, derusting equipment for internal pipes can be equiped with single-gun, double-gun, four-gun, six-gun and eight-gun sand tank. Used for the diameter range: φ48-φ1000.
Steel Pipe Inner Sandblasting machine composed of  pipe-rotating machine, grit-blasting trolley, grit-blasting head, grit-graying machine, grit-recycling line, specialized trolley for internal coating, grit-collecting box, grit separator, dust-removing system and operating platform, with many models to choose.

Equipment main structure and characteristics

QG Series Steel Pipe shot blasting machineis consisted of shot blasting chamber, blasting wheel assembly, shot material cycle purify system, roller transmission system, dust removing system, electric control system and so on.

1.Shot blasting chamber

Shot blasting chamber is welded by Q235 steel plate and steel frame. Meanwhile, shot blasting chamber equip testing door, which is the seal space to clean the workpiece. Inside of shot blasting chamber is protected by cast iron protective plate (material ZCr5,thickness 10mm), meanwhile, it is impacted by protective cap. 

2.Blasting wheel assembly

Two sides of top shot blasting machine equip two sets blasting wheel assembly. The location of blasting wheel is calculated by computer three-dimensional dynamic simulation. The location and angel are calculated by computer to assure the workpieces completely cleaning.

3.Shot material cycle purify system

It is consisted of screw conveyor, bucket elevator, shot and grit separator, supplying shot sluice valve ,slipping shot pipe and so on.

4.Roller transmission system

Transmission roller consists of charging roller and discharging roller. 

5.Dust Collector

It consists of dust collector body, blower, settling tank and pipeline.This equipment takes two grade dust removal, the dust goes through settling tank first, the large grain will fall down through inertia, then large particles will come out by filter cylinder type. 

Quality and After-sale Assurance

1. Supplier promise the name, model, specification and quantity comply with technical protocol, assuring the machine is new equipment with qualified material manufactured through perfect technology. There are no defects in design, material and technologies, which is suitable for propose of demander, and meets the standard of national industry. The quality is stable and reliable. 

2. Equipment warranty period is 12 months after the final acceptance( except force majeure, inappropriate operation and the quick-wear parts wears).

3. The equipment will pass the installment and test before delivery, after the quality is qualified, we will disassembly the equipment, coating and deliver.

Technical Parameters

Parameter	Cleaning Size (mm)	Cleaning Speed (m/min)	Function
QGW100	50-300	2-10	Outer Wall of Shot blasting Machine
QGW720	159-720	2-6
QGW1200	219-1016	1-6
QGW1500	325-1600	1-6
QGW2800	1016-2800	1-2
QGN100	50-300	1-4	Inner Wall of Shot blasting Machine
QGN700	325-720	1-2
QGN1000	720-1016	1-4
QGN1500	1016-1500	1-4

Steel pipe/tube external wall shot blasting machine

steel pipe/tube inner wall sand blasting machine

Certifications

Main products

Company Profile

Qingdao Antai Heavy Industry Machinery Co., Ltd.

Qingdao Antai Heavy Industry Machinery has founded in 2003, formally changed to its current name in 2011. Located in the beautiful west coast of Qingdao, it is only 30 km to Qingdao seaport, convenient for export transportation. Our workshop area covers more than 15000 square meters, it is a research, design, manufacture, installation and consulting factory company for the surface finishing, environmental protection and foundry solution. Antai Group and China University of Petroleum jointly established the Qingdao Antai Haibo Technology R&D Center Co., Ltd., which focuses on the research and development of new practical equipment for shot blasting. The technical department also has many senior engineers and professional 3D designers with more than ten years of design experience. The chief engineer of the Technology R & D Center has 30 years of design experience and was hired as the chairman of the China Foundry Machinery Standards Committee to participate in the formulation of national standards for surface cleaning equipment in China. Company has extensive experience and brings the technical and professional workers together, mainly produces shot blasting machine, sand reclamation equipment, molding equipment, and dust collector. Qingdao Antai is strong at providing non-standard design and manufacture according to customer specific needs. Qingdao Antai shot blasting technology will amaze you with its intelligent design, innovative details and particularly durable components. We offer you an overall solution, as we have our own development, engineering, production and after-sales service. All systems are inspected and tested prior to delivery in our workshops to ensure fast installation on site and deliver a reliable product on time every time.Here at Qingdao Antai, after-sales support is also a top priority so we ensure that you get all the help you need with your newly delivered and tested system.Our greatest reward is the satisfaction of our customers with the results achieved thus far. The company has passed ISO9 0 0 1: 2 0 0 8, ISO 1 4 0 0 1: 2 0 04, CE certificate. Our company management strictly according to international standards ISO9 0 0 0 quality system implementation operation. We have established long term partnership with international brand suppliers, such as ABB motor; SEW gear box, Mitsubishi/OMRON/SIEMENS electric components, SMC cylinder, SKF & NSK bearing, and Asco pulse valves. With quality products, competitive price and attentive service, our products are widely sold in domestic market and exported to Amercia, Germany, Russia, Australia, India ,Greece, Sri Lanka, Vietnam, Pakistan, Uruguay, Ecuador, Colombia, Israel, Ukraine, Bangladesh, Uzbekistan, Philippines, Hungary, Macedonia and Indonesia etc. We always adhere to "honesty is the best selling, personalized service is the final product. Customer satisfaction is the greatest impetus to the development of enterprises." Aim to establish a perfect quality management system and network information feedback system for filing separately for each customer, to provide customers with maximum caring and thoughtful, efficient and flexible full service. We look forward to working with you and your company's sincere cooperation!
 

What Service Antai can supply?

1. Our engineers can work separately according to the requirements of design for clients of the equipment. and send a customer confirmation to help customers to save costs. 2. During the manufacture of the equipment, we photograph product production progress, and sent to the customer to track the progress. 3. The goods hair go, we will send the original documents for the customer (such as packing list, bill, CO, Form E, Form A, Form F, Form M, B/L etc.) 4. We can provide customers with free English foundation drawing, installation drawings, manuals, maintenance manuals and parts drawings. 5. We can send our engineers to installation and debugging overseas, and free training of operators and maintenance workers. 6. We have a set of After-sales service system, A ID will be sent to each customer, they can log in this system that view all information to buy equipment and parts by it. We provide 24-hour online consultation.